The PID control box, temperature probe, water heating pot and the re-circulation coil are ready (see parts one, two and three). The remaining jobs I need to complete are: Install fittings for the pipe work Test everything! The parts used here are: PT100 temperature probe with 1/4″ BSP fitting 1/2″ to 1/4″ BSP Reducing bush 1/2″ BSP female nipple 2 x 1/2″ Camlock Type F fittings 2 x 1/2″ Camlock Type C fittings 2 x hose clips 0.5m silicone hose I…
The PID control box, temperature probe, and the water heating pot are ready (see parts one and two). The remaining jobs I need to complete are: Make a copper pipe coil Install fittings for the pipe work Test everything! So, next up is some copper bending! The parts used here are: 3 meters of 12mm copper pipe Kids play sand 2 x 1/2″ / 12mm compression fittings 1/2″ Tee piece A 500ml beer bottle I first tried to bend the…
The PID control box and temperature probe are ready (see part 1 here). The next jobs I need to complete are: Fit a heating element to the asparagus pot Make a copper pipe coil Install fittings for the pipe work Test everything! So, next up is setting up the pot that’s going to hold my warm water and act as the heat exchanger. The parts I used are: 3 Litre Asparagus Steamer 1500W Kettle Element The steamer is basically just…
Since building my brewery kit, I’ve managed to brew a few beers… #1 – Dirty Daemon II – Detailed in my last post, an American APA with loads of Citra in the boil & dry-hopped. #2 – A Christmas CarAle – A Christmas ale spiced with Star Anise, Cinnamon and Nutmeg. Based on Greg Hughes’ recipe in Home Brew Beer. #3 – Oaty McOatFace – An Oatmeal Stout, based on James Morton’s recipe in Brew. #4 – Unnamed – A…
TLDR; I had a number of disasters, but it turned out ok in the end! Read on… 🙂 I’ve finally got everything together to make my first all-grain brew on my new equipment! As it turned out really well, I’ve decided to make the all-grain version of the Dirty Daemon extract-based beer I made last November. It’s a really nice amber-coloured American Pale Ale with lots of Citra hops and should turn out at around 6.5% vol. On Friday evening I…